NJU3505L Ver la hoja de datos (PDF) - Japan Radio Corporation

Número de pieza

componentes Descripción

Lista de partido

NJU3505L

4-BIT SINGLE CHIP MICRO CONTROLLER

Japan Radio Corporation  

NJU3505

• TIMER1 / PRESCALER CONTROL REGISTER { PHY3 ; (Y'=3, Peripheral register table 0) }

[ Writing to the Timer1 / Prescaler Control Register ]

(MSB) 3

2

1

0 (LSB)

PHY3 −

Start control

/ 1:Start

Operation mode / 0:Single mode, 1:Repeat mode

Prescaler control / 0:On, 1:Off

EX.) An example of the start procedure in the single mode and the internal clock operation.

:

:

SRPC

LDI Y,3

LDI A,%0000

TAP

LDI A,%0001

TAP

:

:

;

;PHY3(Timer1/Prescaler Control Register) is pointed.

;"0000"(BIN) is stored to accumulator

Single mode,

;Data is transferred from accumulator to PHY3 Prescaler is enable

;"0001"(BIN) is stored to accumulator

;Data is transferred from accumulator to PHY3 The count is started.

Remarks) When the prescaler generating the internal count clock is stopped the operation, Timer is also stopped.

But the data in the counter is kept. Therefore Timer can continue to count from the kept condition of

the counter when the prescaler is started the operation again. However, the clocks from the prescaler

are delivered to Serial I/O, CKOUT terminal and A/D converter controller, therefore the prescaler

requires careful operation, especially stop or start.

When the prescaler is started the operation again after it was stopped, it is reset and start to count from

“zero”.

[ Reading from the Timer1 / Prescaler Control Register ]

(MSB) 3

2

1

0 (LSB)

PHY3 “0”

Overflow flag

/ 1:Overflow

Operation mode / 0:Single mode, 1:Repeat mode

Prescaler control / 0:On, 1:Off

EX.) An example of the overflow in the single mode and the internal clock operation.(The data of the

Timer1 / Prescaler Control Register is "0001"(BIN).)

:

:

SRPC

LDI Y,3

TPA

:

:

;

;PHY3(Timer1/Prescaler Control Register) is pointed.

;"0001"(BIN) of PHY3 is transferred to accumulator.

- 26 -

Share Link: