ISO 9001 CERTIFIED BY DSCC
4224 75 VOLT 10 AMP MOSFET
H-BRIDGE PWM MOTOR
M.S.KENNEDY CORP.
DRIVER/AMPLIFIER
8170 Thompson Road Cicero, N.Y. 13039
FEATURES:
•Low RDS(ON) 0.020Ω Typical
•Low Cost Complete H-Bridge
•10 Amp Capability, 75 Volt Maximum Rating
•Self-contained Smart Lowside/Highside Drive Circuitry
•Internal 250KHz PWM Generation, Shoot-through Protection
•Isolated Case Allows Direct Heatsinking
•Four Quadrant Operation, Torque Control Capability
•Logic Level Disable Input
•Logic Level High Side Enable Input for Special Modulation or Function
DESCRIPTION:
(315) 699-9201
The MSK 4224 is a complete H-Bridge circuit to be used for DC brushed motor control or Class D switchmode
amplification. All of the drive/control circuitry for the lowside and highside switches are internal to the circuit. The
250KHz PWM circuitry is internal as well, leaving the user to only provide an analog signal for the motor speed/
direction, or audio signal for switchmode audio amplification. The MSK 4224 is constructed on a space efficient
ceramic coated insulated metal substrate that can be directly connected to a heatsink.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
PIN-OUT INFORMATION
1 HEN
2 Disable
3 N/C
4 Input
5 Ground
6 Ground
7 N/C
8 Vcc
9 Output A
18 Output B
17 Output B
16 Rsense B
15 Rsense B
14 V+
13 V+
12 Rsense A
11 Rsense A
10 Output A
1
Rev.- 06/98