PI49FCT32806SE Ver la hoja de datos (PDF) - Pericom Semiconductor
Número de pieza
componentes Descripción
Lista de partido
PI49FCT32806SE Datasheet PDF : 7 Pages
| |||
PI49FCT32806
3.3V, 2 x 1:5 CMOS Clock Driver
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, +25°C ambient and maximum loading.
3. VOH = VCC – 0.6V at rated current.
4. This parameter is determined by device characterization but is not production tested.
5. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
Power Supply Characteristics
Parameters Description
ICC
Quiescent Power
Supply Current
DICC
Supply Current per
Inputs @ TTL HIGH
ICCD
Supply Current per
Input per MHz(4)
IC
Test Conditions(1)
VCC = Max.
VIN = GND or VCC
Min. Typ(2) Max. Units
—
3
30
µA
VCC = Max.
VIN = VCC – 0.6V(3)
— 15.0 300 µA
VCC = Max.,
Outputs Open
OEA or OEB = GND
Per Output Toggling
50% Duty Cycle
VCC = Max.,
Outputs Open
fO = 10 MHZ
50% Duty Cycle
OEA or OEB = GND
Mon. Outputs Toggling
VCC = Max.,
Outputs Open
fO = 2.5 MHZ
50% Duty Cycle
OEA or OEB = GND
Eleven Outputs Toggling
VIN = VCC
VIN = GND
VIN = VCC
VIN = GND
VIN = VCC – 0.6V
VIN = GND
VIN = VCC
VIN = GND
VIN = VCC – 0.6V
VIN = GND
— 0.08 0.16 mA/
MHZ
—
3.3
9.0(5)
—
3.3 10.0(5)
mA
—
1.8
6.0(5)
—
1.8
7.0(5)
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3. Per TTL driven input (VIN = VCC – 0.6V); all other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the IC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fONO)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = VCC – 0.6V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fO = Output Frequency
NO = Number of Outputs at fO
All currents are in milliamps and all frequencies are in megahertz.
3
PS8495A 09/28/04
Share Link: 