RV5C339 Ver la hoja de datos (PDF) - RICOH Co.,Ltd.

Número de pieza

componentes Descripción

Lista de partido

RV5C339

3-WIRE SERIAL INTERFACE REAL-TIME CLOCK IC WITH VOLTAGE MONITORING FUNCTION

RICOH Co.,Ltd. 

RV5C339A

2.2-7 WAFG and DAFG

Alarm_W Flag Bit and Alarm_D Flag Bit

WAFG, DAFG

Description

0

Indicating a mismatch between current time and preset alarm time

(Default setting)

1

Indicating a match between current time and preset alarm time

The WAFG and DAFG bits are valid only when the WALE and DALE bits have the setting of 1, which is caused

approximately 61µs after any match between current time and preset alarm time specified by the Alarm_W registers

and the Alarm_D registers. The WAFG and DAFG bits accept only the writing of 0, which disables (“H”) the

INTRA(or INTRB) pin until it is enabled (“L”) again at the next preset alarm time. Conversely, setting the WAFG

and DAFG bits to 1 causes no event. The WAFG and DAFG bits will have the reading of 0 when the alarm interrupt

circuit is disabled with the WALE and DALE bits set to 0.

Output Relationships Between the WAFG or DAFG Bit and INTRA, INTRB

Approx. 61µs

Approx. 61µs

Settings of WAFG (DAFG) bit

Output of INTRA (INTRB) pin

Writing of 0 to WAFG

(DAFG) bit

(Match between current time (Match between current time

and preset alarm time)

and preset alarm time)

Writing of 0 to WAFG

(DAFG) bit

(Match between current time

and preset alarm time)

15

Share Link: