XE9624F Ver la hoja de datos (PDF) - Xecom

Número de pieza

componentes Descripción

Lista de partido

XE9624F

A Complete Send and Receive Fax & Data Modem

Xecom 

FCC Instructions

This product complies with Part 68 of the FCC Rules and Regulations. Each device shipped includes a label which contains the FCC

Registration Number and Ringer Equivalence (REN). If requested, this FCC information must be provided to the telephone

company. A registration label must be affixed to the cabinet's exterior for each device mounted within a closed assembly.

Ringer Equvalence (REN) is used to calculate the number of devices you may connect to one telephone line and still have all of the

devices respond to an incoming call. Typically, the sum of the RENs of all devices connected to one line should not exceed five

(5.0). Contact your local telephone company to determine the maximum REN for your area.

Mount this device in the final assembly so as to prevent exposure to any hazardous voltages in the system and to preserve the high

voltage protection between Tip/Ring and the rest of the system. Installation must provide adequate separation and restraint of cables

and cords. Xecom recommends maintaining a minimum of .100 inches between the Tip and Ring traces and all other circuits. No

circuitry may be added between Tip/Ring and the telephone line connection unless specifically allowed by the rules.

This device requires use of an RSOC RJ-11C jack for the telephone line connection. The jack selected must be certified to meet

FCC Part 68 subpart F requirements.

If you experience trouble with this device, contact XECOM at (408)945-6640 to obtain service. There are no repairs the customer

may make to this device. If your system causes harm to the telephone network, the telephone company may discontinue service

temporarily until the problem has been corrected or it is demonstrated that the device is not malfunctioning. If possible, you will be

notified in advance that service is being discontinued. If advance notice is not practical, you will be notified as soon as possible.

Your telephone company may make changes to their facilities, equipment, or operation that affect proper functioning of your

equipment. You will be notified in advance of such changes to give you the opportunity to maintain uninterrupted telephone service.

This device cannot be used on coin operated telephone lines provided by the telephone company. Connection of this equipment to

party lines is subject to state tariffs.

Any one using this device for fax transfer must include sender identification information as required in the Telephone Consumer

Protection Act of 1991. The Telephone Consumer Protection Act of 1991 makes it unlawful to send a fax without clearly identifying

the fax sender (business or individual) and the number of the transmitting fax machine. This information may be provided either on

the first page of the fax or in the top or bottom margin of each page. The number listed may not be a 900 number or other number

for which charges exceed local or long distance transmission.

The final assembler must provide these FCC instructions to the end user of the equipment.

FCC Registration Number: DWEUSA-20716-MM-E

Ringer Equivalence: 0.8B

XE9624F/XE9624FS

XECOM\15

Share Link: