ST7 EPB User Manual
3 - How to Program
3.2
A typical programming session
The following instructions describe how you would typically program an ST
microcontroller using Windows Epromer. Note that this is not the only way to
program an ST microcontroller using Windows Epromer; for more information on
how to use the Windows Epromer, click the Help command in the main menu bar.
1 Make sure that the microcontroller you want to program is correctly connected
for programming, either via the ZIF socket or in ISP mode.
2 In the Windows Epromer window, from the main menu, select
Configure>Configure EPROMER. The epromer configuration dialog box is
displayed:
3 In the Select Hardware and Port tab of the Epromer Configuration window,
choose the programming device you are using from the list and the host PC
parallel port to which it is connected (i.e. LPT1 or LPT2).
4 Click on the Select Chip tab of the Epromer Configuration window.
11/20