TDA3608THQ Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza

componentes Descripción

Lista de partido

TDA3608THQ

Multiple voltage regulators with switch

Philips Electronics 

Philips Semiconductors

Multiple voltage regulators with switch

Product specification

TDA3608Q; TDA3608TH

10. The peak current of 300 mA can only be applied for short periods (t < 100 ms).

11. The dropout voltage is measured between pins BU and REG2.

12. The dropout voltage of the power switch is measured between pins VP and SW.

13. The maximum output current of the power switch is limited to 1.8 A when VP > 18 V.

14. During short-circuit, current Isc of the power switch is held constant to a lower value than the continuous current after

a delay of at least 10 ms. Furthermore, a foldback function is activated after the delay. When VSW < 3.5 V, the

short-circuit current is reduced to 0.5 A (typical value). The short-circuit protection of the power switch functions best

when C1 = 220 µF and C2 = 10 µF.

15. The reverse current of the backup switch is the current which is flowing out of pin VP at VP = 0 V.

handbook, halfpage

8.5

VREG1

(V)

MGT571

2

Isc

≥300

Im

IREG1 (mA)

Fig.8 Foldback current protection of regulator 1.

handbook, halfpage

VREG2

(V)

5.0

MGT572

1

Isc ≥50

IREG2 (mA)

Im

Fig.9 Foldback current protection of regulator 2.

handbook, halfpage

VREG3

(V)

5.0

MGT573

1

I sc

≥ 200

Im

IREG3 (mA)

Fig.10 Foldback current protection of regulator 3.

handbook, halfpage

14.2

MGT574

VSW

(V)

3

(1)

0.5

ISW (A)

2

(1) Delayed; time depends on value of capacitor C7.

Fig.11 Current protection of power switch.

2003 Nov 28

13

Share Link: