TEN15-4823WI Ver la hoja de datos (PDF) - Traco Power
Número de pieza
componentes Descripción
Lista de partido
TEN15-4823WI Datasheet PDF : 3 Pages
| |||
DC/DC Converters
TEN 15WI
15 Watt
Input Specifications
Input current at no load
24 Vin models: 25 mA typ.
48 Vin models: 15 mA typ.
Input current at full load
24 Vin;
24 Vin;
48 Vin;
48 Vin;
3.3 Vout models:
other output models:
3.3 Vout models:
other output models:
528 mA typ.
740 mA typ.
264 mA typ.
370 mA typ.
Surge voltage
(100 msec. max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise (input)
EN 55022 level A, FCC part 15, level A
Output Specifications
Voltage set accuracy
±1%
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
± 0.5 % max.
± 1 % max.
Ripple and noise (20 MHz Bandwidth)
80 mVpk-pk max.
Temperature coefficient
± 0.02 % / K
Output current limitation
> 110% of Iout max., foldback
Short circuit protection
indefinite (automatic recovery)
Capacitive load
single output models: 470 µF max.
dual output models: 220 µF max.
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
– 40 °C ... + 85 °C
+ 100 °C max.
– 55 °C ... + 125 °C
Derating
3.5%/K above 70°C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E)
> 700’000 h @ + 25 °C
Isolation voltage
– Input/Output
1‘500 VDC
Isolation capacity
– Input/Output
1200 pF typ
Isolation resistance
– Input/Output (500 VDC)
> 1’000 MOhm
Switching frequency (fixed)
330 kHz typ. (pulse width modulation)
Remote On/Off:
– On:
– Off:
– Off idle current:
2.5 ... 5.5 VDC or open circuit.
-0.7 ... 0.8 VDC or short circuit pin 2 and pin 6
10 mA max.
Safety standards
UL 60950, EN 60950, IEC 6095 (Compliance
up to 60 VDC input voltage(SELV limit)
Safety approvals
UL /cUL pending
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
Share Link: 