datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

TS3011ICT Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza
componentes Descripción
Lista de partido
TS3011ICT
ST-Microelectronics
STMicroelectronics ST-Microelectronics
TS3011ICT Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Absolute maximum ratings and operating conditions
TS3011
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
VID
VIN
RTHJA
RTHJC
Supply voltage(1)
Differential input voltage(2)
Input voltage range
Thermal resistance junction to ambient(3)
SC70-5
SOT23-5
Thermal resistance junction to case (3)
SC70-5
SOT23-5
5.5
±5
(VCC-) - 0.3 to (VCC+) + 0.3
205
250
172
81
V
V
V
°C/W
°C/W
TSTG
Storage temperature
-65 to +150
°C
TJ
Junction temperature
150
°C
TLEAD Lead temperature (soldering 10 seconds)
260
°C
Human body model (HBM)(4)
2000
ESD
Machine model (MM)(5)
Charged device model (CDM)(6)
200
V
SOT23-5
SC70-5
1500
1300
Latch-up immunity
200
mA
1. All voltage values, except the differential voltage, are referenced to VCC-.
2. The magnitude of input and output voltages must never exceed the supply rail ±0.3 V.
3. Short-circuits can cause excessive heating. These values are typical.
4. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
6. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
TOper
VCC
VICM
Operating temperature range
Supply voltage (VCC+ - VCC-)
-40°C < Tamb < +125°C
Common mode input voltage range
-40°C < Tamb < +125°C
-40 to +125
°C
V
2.2 to 5
V
(VCC-) - 0.2 to (VCC+) + 0.2
2/14
Doc ID 022078 Rev 1

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]