3235 Ver la hoja de datos (PDF) - Allegro MicroSystems

Número de pieza

componentes Descripción

Lista de partido

3235

DUAL-OUTPUT HALL-EFFECT SWITCH

Allegro MicroSystems 

3235

DUAL-OUTPUT

HALL-EFFECT SWITCH

Dimensions in Inches

(controlling dimensions)

0.208

0.203

45°

0.063

0.059

Dimensions in Millimeters

(for reference only)

5.28

5.16

45°

1.60

1.50

0.138

0.133

0.085 1 2 3 4

MAX

0.600

0.560

SEE NOTE

0.016

0.050

BSC

45°

0.033

0.015

3.51

3.38

2.16 1 2 3 4

MAX

15.24

14.23

SEE NOTE

Dwg. MH-009C in

0.41

1.27

BSC

45°

0.84

0.38

Dwg. MH-009C mm

NOTES: 1. Tolerances on package height and width represent allowable mold offsets. Dimensions given are measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from

the detail specifications as may be required to permit improvements in the design of its products.

Components made under military approvals will be in accordance with the approval requirements.

The information included herein is believed to be accurate and reliable. However, Allegro

MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or

other rights of third parties which may result from its use.

Share Link: