VS-502-DKF-GNN-938 Ver la hoja de datos (PDF) - Vectron International

Número de pieza

componentes Descripción

Lista de partido

VS-502-DKF-GNN-938

Voltage Controlled SAW Oscillator

Vectron International 

Product Data Sheet

PRELIMINARY

VS-502

Voltage Controlled SAW Oscillator

Features

• Output frequencies from 300 MHz to 1350 MHz

• Ultra low jitter < 0.2 ps-rms (12 kHz to 20 MHz)

< 0.2 ps-rms (50 kHz to 80 MHz)

• Low phase noise, -160 dBc/Hz @ 1 MHz offset (1 GHz)

• Small low profile 9.0 * 14.0 * 4.5 mm SMT package

• 3.3 V, 5.0 V and 12V Supply Options

• LV-PECL, PECL, or Sinewave (0 to +10 dBm into 50 Ώ)

• Output disable feature (For LVPECL - PECL option)

Product is free of lead and compliant to

EC RoHS Directive

Applications

• Point to Point / Point to Multi Point Radios

• Instrumentation

• PLL Frequency Translation

• Test & Measurement

• Military & Avionics

Description

The VS-502 is a SAW based voltage controlled oscillator that

operates at the fundamental frequency of the internal SAW

resonator. This direct approach enables this series to achieve

low phase noise and jitter performance at high output

frequencies and over wide operating temperature range. The

oscillator is housed in a hermetically sealed J-lead surface

mount package offered on tape and reel. As an option, it has

an output disable to facilitate on-board test

Vectron International, 267 Lowell Rd, Hudson NH 03051-4916

1

Tel: 1-88-VECTRON-1 Website: www.vectron.com

Rev: 27January06

Share Link: