VTC1 Ver la hoja de datos (PDF) - Vectron International

Número de pieza

componentes Descripción

Lista de partido

VTC1

Voltage Controlled Temperature Compensated Crystal Oscillator

Vectron International 

VTC1 Data sheet

VCXO Functional Description

VCXO Feature: The VTC1 can be ordered with a VCXO function for applications where it will be used in a

PLL, or the output frequency needs fine tune adjustments. This is high impedance, 1 Mohm, input and can

be driven with an op-amp or terminated with adjustable resistors etc. Pin 1 should not be left floating on

the VCXO optional devices.

“No Adjust” Feature: In applications where the VTC1 will not be used in a PLL, or the output frequency

does not fine tune adjustments, the best device to use would be a VTC1-x0xxx. By using the “no adjust”

option, the circuit is simplified as Vc does not need to adjusted or set to a predetermined voltage and pin

1 should be grounded or left open (but not set to a voltage such as the supply).

Outline Diagrams, Pad Layout and Pin Out

Table 3. Pinout

Pin #

Symbol

1

N/C or

VC

2

GND

3

fO

4

VDD

Function

No Connect (VTC1-x0xx)

or VCXO Control Voltage

Electrical and Case Ground

Output Frequency

Supply Voltage

NOTE: Additional pads are used to program and adjust the TCXO during manufacturing and should be left

open; do not terminate these to the supply voltage. Some designs do not include these additional pads.

It’s recommended to not have traces routed underneath the devices.

Contact Pads are gold over nickel

Figure 3, Package drawing

Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1 e-mail: vectron@vectron.com

Share Link: