MIC5201YS Ver la hoja de datos (PDF) - Microchip Technology

Número de pieza

componentes Descripción

Lista de partido

MIC5201YS

200 mA Low Dropout Regulator

Microchip Technology 

MIC5201

1.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Input Voltage (VIN) Fixed................................................................................................................. –20V to +60V

Supply Input Voltage (VIN) Adjustable......................................................................................................... –20V to +20V

Enable Input Voltage (VEN) Fixed ............................................................................................................... –20V to +60V

Enable Input Voltage (VEN) Adjustable ....................................................................................................... –20V to +20V

Power Dissipation (Note 1) .................................................................................................................... Internally Limited

Operating Ratings ‡

Supply Input Voltage (VIN) Fixed................................................................................................................ +2.5V to +26V

Supply Input Voltage (VIN) Adjustable........................................................................................................ +2.5V to +16V

Enable Input Voltage (VEN) .................................................................................................................................0V to VIN

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended

periods may affect device reliability.

‡ Notice: The device is not guaranteed to function outside its operating ratings.

Note 1: The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(max), the

junction-to-ambient thermal resistance, θJA, and the ambient temperature, TA. The maximum allowable

power dissipation at any ambient temperature is calculated using: P(max) = (TJ(max) – TA) ÷ θJA. Exceeding

the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go

into thermal shutdown.

 2017 Microchip Technology Inc.

DS20005718A-page 3

Share Link: