ARS3012X Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Lista de partido
ARS3012X Datasheet PDF : 11 Pages
| |||
RS (ARS)
2. Specifications
Contact
Rating
Item
Arrangement
Contact material
Contact resistance (Initial)
Nominal switching capacity
Contact carrying power
Max. switching voltage
Max. switching current
Nominal
operating
power
Single side stable type
1 coil latching type
2 coil latching type
High frequency
characteristics,
Impedance: 50Ω
(Initial)
V.S.W.R.
Insertion loss (without D.U.T. board’s loss)
Isolation
High frequency
characteristics,
Impedance: 75Ω
(Initial)
V.S.W.R.
Insertion loss (without D.U.T. board’s loss)
Isolation
Electrical
characteristics
Insulation resistance (Initial)
Breakdown
voltage
(Initial)
Between open contacts
Between contact and earth terminal
Between contact and coil
Temperature rise (at 20°C 68°F)
Operate time (at 20°C 68°F)
Release time (at 20°C 68°F)
Mechanical
characteristics
Operation noise*
Set time and Reset time (at 20°C 68°F)
Shock
resistance
Functional
Destructive
Vibration
resistance
Functional
Destructive
Standard type
Silent type (75Ω, PC board terminal type only)
Mechanical
life
Single side stable standard type
Single side stable silent type
Latching type
Expected life
50Ω type
Electrical life
75Ω type
Conditions
Unit weight
Conditions for operation, transport and storage
Specifications
1 Form C
Gold plating
Max. 100 mΩ (By voltage drop 10 V AC 10mA)
1W (at 3 GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load)
Max. 10W (at 3GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4)
30 V DC
0.5 A DC
200mW
200mW
400mW
Max. 1.20/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.40/3GHz (Surface-mount terminal)
Max. 0.10dB/900MHz, Max. 0.35dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.40dB/3GHz (Surface-mount terminal)
Min. 60dB/900MHz, Min. 35dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Max. 1.15/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.50/3GHz (Surface-mount terminal)
Max. 0.10dB/900MHz, Max. 0.30dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.50dB/3GHz (Surface-mount terminal)
Min. 60dB/900MHz, Min. 30dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Min. 100MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section.)
500 Vrms for 1min. (Detection current: 10mA)
500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Max. 60°C 140°F
(By resistive method, nominal voltage applied to the coil, contact carrying current: 10mA)
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Max. 6 ms (Nominal voltage applied to the coil, excluding contact bounce time)
(without diode)
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms, detection time: 10µs)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10µs)
10 to 55 Hz at double amplitude of 5 mm
Approx. 40dB
Approx. 30dB
Min. 5×106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(10V DC 10mA resistive load)/Min. 3×105 (24V DC 10mA resistive load)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(1W, at 3GHz, Impedance: 50Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Min. 3×105 (10mA 24V DC resistive load)
Min. 3×105 (1W, at 3GHz, Impedance: 75Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Ambient temperature: –40 to 70°C –40°F to 158°F
(Single side stable standard and Latching type)
Ambient temperature: –40 to 60°C –40°F to 140°F (Single side stable silent type)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 2 g .071 oz
* Measured the operation noise of the relay alone (with diodes at both ends of the coil) 30cm away from top side, by the A-weighted, FAST method while applying the rated
voltage.
(Reference) Operation noise of RK relay (existing model): Approx. 50dB
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB106E 201202-T
Share Link: 