A43L2616 Ver la hoja de datos (PDF) - AMIC Technology
Número de pieza
componentes Descripción
Lista de partido
A43L2616 Datasheet PDF : 42 Pages
| |||
Decoupling Capacitance Guide Line
Recommended decoupling capacitance added to power line at board.
Parameter
Symbol
Decoupling Capacitance between VDD and VSS
CDC1
Decoupling Capacitance between VDDQ and VSSQ
CDC2
Note: 1. VDD and VDDQ pins are separated each other.
All VDD pins are connected in chip. All VDDQ pins are connected in chip.
2. VSS and VSSQ pins are separated each other
All VSS pins are connected in chip. All VSSQ pins are connected in chip.
Value
0.1 + 0.01
0.1 + 0.01
A43L2616
Unit
μF
μF
DC Electrical Characteristics
(Recommended operating condition unless otherwise noted, TA = 0 to 70°C )
Symbol
Parameter
Test Conditions
Icc1
Icc2 P
Icc2 PS
Operating Current
(One Bank Active)
Burst Length = 1
tRC ≥ tRC(min), tCC ≥ tCC(min), IOL = 0mA
Precharge Standby Current CKE ≤ VIL(max), tCC = 15ns
in power-down mode
CKL ≤ VIL(max), tCC = ∞
Speed
-5.5 -6 -7
Unit Notes
100 85 85 mA
1
2
mA
1
ICC2N
Precharge Standby Current
in non power-down mode
CKE ≥ VIH(min), CS ≥ VIH(min), tCC = 15ns
Input signals are changed one time during 30ns
20
mA
CKE ≥ VIH(min), CLK ≤ VIL(max), tCC = ∞
ICC2NS
Input signals are stable.
15
ICC3N
Active Standby current in
non power-down mode
CKE ≥ VIH(min), CS ≥ VIH(min), tCC = 15ns
30
mA
(One Bank Active)
Input signals are changed one time during 30ns
ICC4
Operating Current
(Burst Mode)
IOL = 0mA, Page Burst
All bank Activated, tCCD = tCCD (min)
140 100 100 mA
1
ICC5 Refresh Current
tRC ≥ tRC (min)
160 130 130 mA
2
ICC6 Self Refresh Current
CKE ≤ 0.2V
1
3
mA
0.5
4
Note: 1. Measured with outputs open. Addresses are changed only one time during tCC(min).
2. Refresh period is 64ms. Addresses are changed only one time during tCC(min).
3. ICC6 normal version: A43L2616V-6, A43L2616V-7.
4. ICC6 low self refresh current version: A43L2616V-5.5V, A43L2616V-6V, A43L2616V-7V.
(February, 2008, Version 3.2)
5
AMIC Technology, Corp.
Share Link: 