APPLICATIONS INFORMATION CONT’D
current. In that case, the output capacitor is chosen
to have sufficiently low ESR.
For ceramic output capacitor, typically choose a
capacitance of about 22µF. For tantalum or
electrolytic capacitors, choose a capacitor with less
than 50mΩ ESR.
Rectifier Diode
Use a Schottky diode as the rectifier to conduct
current when the High-Side Power Switch is off.
The Schottky diode must have current rating higher
than the maximum output current and a reverse
voltage rating higher than the maximum input
voltage.
ACT4455
Rev 2, 21-Nov-12
Innovative PowerTM
-7-
www.active-semi.com
Copyright © 2012 Active-Semi, Inc.