datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

CM3003-18 Ver la hoja de datos (PDF) - California Micro Devices Corp

Número de pieza
componentes Descripción
Lista de partido
CM3003-18
CALMIRCO
California Micro Devices Corp CALMIRCO
CM3003-18 Datasheet PDF : 11 Pages
1 2 3 4 5 6 7 8 9 10
CM3003
1.5 Amp Dual Mode Low Dropout CMOS Regulator
Features
• Adjustable Output or Internally Fixed
• 375mV dropout at 1.5A load current
• Operates from 2.2V to 5.5V input supply
• Low Ground current (330µA at 1.5A Load)
• Minimal output capacitance required
• Current Limit Protection
• Thermal Overload Protection
• Reverse Voltage Protection
• Thermally enhanced 8-pin SOIC package
• Lead-free versions available
Applications
• Low Voltage "Core" processors
• Graphics Cards
• Gigabit NIC Cards
• PC Motherboards
• Notebooks
Product Description
The CM3003 is a family of very low dropout regulators
that offers dual mode operation. When the Adjust con-
trol pin (ADJ) is grounded, these devices automatically
enter a fixed voltage mode and deliver either a 1.8V or
2.5V output capable of supplying 1.5A, depending on
the device utilized. When the Adjust pin is connected to
an external resistor network the device automatically
operates as an adjustable regulator. The Adjust pin can
also be tied directly to the OUT pin which configures
the CM3003 as a 1.2V regulator.
An Enable control pin (EN) allows the device to be
placed in a low current mode.
The CM3003 devices are fully protected, offering both
overload current limiting, short circuit protection and
high temperature thermal shutdown. These devices
also includes reverse voltage protection that minimizes
any reverse current flow back into the output pin.
The CM3003 devices are housed in a space saving, 8-
pin power SOIC packages which has been thermally
enhanced (integral leadframe) to ensure maximum
junction to ambient power dissipation.
The CM3003 devices are available with optional lead-
free finishing.
Typical Application Circuit
Simplified Electrical Schematic
2.2V - 5.5V
VIN
10µF
GND
CM3003
1.8V/2.5V@1.5A
IN
OUT
VOUT
2.2V-5.5V
IN
Controller
Over Current
EN
Short Circuit
Over Temp
EN
ADJ
GND
100nF 10µF
1.2V Reference
Voltage
+ EN
-
2.5V Output when ADJ = GND
Automatically selects Adjustable Output
(when external resistors are present)
GND
Fixed
Adj
130K
120K
1.5 AMP
OUT
ADJ
© 2004 California Micro Devices Corp. All rights reserved.
01/15/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
L Tel: 408.263.3214 L Fax: 408.263.7846 L www.calmicro.com
1

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]