HMS91C7432 Ver la hoja de datos (PDF) - Hynix Semiconductor
Número de pieza
componentes Descripción
Lista de partido
HMS91C7432 Datasheet PDF : 24 Pages
| |||
Hynix semiconductor
Specifications of HMS91C7432
Continue of Table 3. Listing of Control Code
0x87
Login POP3 server - Host’s command in Simple Command
mode. Instruct the HMS91C7432 to login to the dedicated POP3
server. Upon the command is accepted, HMS91C7432 will run the
following steps, and Connection Status will be reported on each Host to
step.
HMS91C7432
1. Run DNS protocol to resolve for the POP3 server’s IP
address.
2. Register to the POP3 server and run the authentication
check process
3. If authentication check is passed, request the POP3
server to return the number of mail contain in the
mailbox.
4. If UIDL option is set (refer to Table 4 for explanation of
UIDL option), request the POP3 server to return the
Length and UID for each mail in the mailbox.
The Login POP3 process ends when the POP3 server returns the
number of mail and or the UIDL, or in any cases a Logon failure
occurs. Upon receipt of the “Number of Mail” info and the UIDL
info, HMS91C7432 will pass these info to the host by using
Complex Command mode with Control Code 0x00.
The Login POP3 command must be issued after the POP3 Login
information have been passed, otherwise, HMS91C7432 will
issue request using Control Code 0x01 for missing info.
0x88
0x89
Quit POP3 Server - Host’s command in Simple Command mode.
Instruct the HMS91C7432 to end the current POP3 session. Upon
the command is accepted, HMS91C7432 will quit the POP3 Host to
Server and keep ON LINE (keep connection with the internet). HMS91C7432
Quit POP3 OK will be reported to the host by using Control Code
0x02 complex command.
Shut Down HMS91C7432 - Host’s command in Simple
Command mode. Instruct the HMS91C7432 to enter the Power Host to
Down mode. Make sure the SMTP session or the POP3 session is HMS91C7432
terminated and the line is disconnected before the Shut Down
command is issued.
13
Share Link: 