IRU1010-18 Ver la hoja de datos (PDF) - International Rectifier
Número de pieza
componentes Descripción
Lista de partido
IRU1010-18 Datasheet PDF : 8 Pages
| |||
IRU1010-18 & (PbF)
PIN DESCRIPTIONS
PIN#
1
PIN SYMBOL PIN DESCRIPTION
Gnd
Ground pin. This pin must be connected to ground plane using a low inductance short
connection.
2
VOUT
The output of the regulator. This pin is also connected to the tab of the package. An output
capacitor must be connected to this pin to insure stability of the regulator.
3
VIN
Input pin of the regulator. Typically a large storage capacitor is connected from this pin to
ground to insure that the input voltage does not sag below the minimum dropout voltage
during the load transient response. This pin must always be 1.3V higher than VOUT in
order for the device to regulate properly.
BLOCK DIAGRAM
VIN 3
2 VOUT
+
CURRENT
LIMIT
THERMAL
SHUTDOWN
1.25V +
1 Gnd
Figure 2 - Simplified block diagram of the IRU1010-18.
www.irf.com
3
Share Link: 