V54C316162VC-55 Ver la hoja de datos (PDF) - Mosel Vitelic, Corp

Número de pieza

componentes Descripción

Lista de partido

V54C316162VC-55

200/183/166/143 MHz 3.3 VOLT, 2K REFRESH ULTRA HIGH PERFORMANCE 1M X 16 SDRAM 2 BANKS X 512Kbit X 16

Mosel Vitelic, Corp 

MOSEL VITELIC

V54C316162VC

Operating Currents (TA = 0 to 70°C, VCC = 3.3V ± 0.3V)

(Recommended Operating Conditions unless otherwise noted)

Symbol Parameter & Test Condition

ICC1

Operating Current

Active-precharge command cycling,

without Burst Operation

1 bank operation

tRC = tRCMIN., tCK = tCKMIN

CL = 3

ICC2P

Precharge Standby Current

in Power Down Mode

tCK = min.

ICC2PS

ICC2N

CS =VIH, CKE≤ VIL(max)

Precharge Standby Current

in Non-Power Down Mode

tCK = Infinity

tCK = min.

ICC2NS CS =VIH, CKE≥ VIL(max)

tCK = Infinity

Max.

-5 -55 -6 -7 Unit Note

125 120 115 105 mA 3

2

2

2

2 mA 3

2

2

2

2 mA 3

15 15 15 15 mA

5

5

5

5 mA

ICC3P

ICC3PS

Active Standby Current in

Power-down mode

ICC3N

ICC3NS

Active Standby Current in

non Power-down mode

ICC4

Burst Operating Current

Read/Write command cycling

CKE=<VIL(max), tck = min

3

3

3

3 mA

CKE =< VIL(max), tck = infinity 3

3

3

3 mA

CKE=>VIL(max), tck = min

45 45 45 45 mA

CKE => VIL(max), tck = infinity 40 40 40 40 mA

CL = 3 tCK = min.

160 155 150 140 mA 3, 4

ICC5

ICC6

Auto Refresh Current

Auto Refresh command cycling

Self Refresh Current

Self Refresh Mode, CKE=<0.2V

CL = 2 tCK = min.

CL = 3

tCK = min.

160 155 150 140 mA

110 105 100 90 mA 3

1

1

1

1 mA

Notes:

3. These parameters depend on the cycle rate and these values are measured by the cycle rate under the minimum value of tCK and

tRC. Input signals are changed one time during tCK except for ICC6 and for standby current when tCK = infinity.

4. These parameter are measured with continuous data stream during read access and all DQ toggling.

V54C316162VC Rev. 1.4 December 2001

9

Share Link: