HEX40-AB-00-21-A9-1 Ver la hoja de datos (PDF) - TE Connectivity

Número de pieza

componentes Descripción

Lista de partido

HEX40-AB-00-21-A9-1

HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORS, PLAIN CLAMPING NUT

TE Connectivity 

CUSTOMER DRAWING

REV:

E

DATE:

Sep 24, 2012

APPLICATION

- These adaptors are designed to be mounted on the following connectors:

MIL-C-38999 Series III and IV

- They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular

connectors only.

- They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink

moulded parts where strain relief is required – see illustration.

MOULDED PART

- Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant

selection details.

INSTALLATION

- See Installation Procedure RPIP-696-04.

PACKAGING

- All components are supplied in a plastic bag.

NOTES!

1. Item 4 - Star - is not supplied with Hexashield Order Number 09.

2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow

unshielded wires to pass through the assembly.

STAR SIZE

ØD MAX

15

0.12”

[3.0]

17

0.24”

[6.0”]

19

0.35”

[9.0]

21

0.47”

[12.0]

23

0.59”

[15.0]

25

0.71”

[18.0]

3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard.

If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard.

See below for illustration.

EXAMPLE: FERRULE QUANTITY CODE -A13

-A13 = -A10 SPLIT STAR + -A3 STANDARD STAR

4. Assembly is to be permanently marked with Code Identity Number and Part Number.

(e.g. 06090 HEX40-AB-00-21-A9-1)

© 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights reserved.

TITLE:

TE Connectivity

300 Constitution Drive

HEXASHIELD ADAPTOR FOR

CODE 40 CONNECTORS,

Menlo Park, CA 94025, USA

PLAIN CLAMPING NUT

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN MILLIMETERS.

INCH DIMENSIONS ARE SHOWN IN

BRACKETS

DRAWN:

DATE:

CRJ

MAR 00

TE Connectivity reserves the right to amend this drawing at

any time. Users should evaluate the suitability of the

product for their application.

CAGE CODE:

06090

REVISED PER

ECO-12-017034

DOCUMENT NO.

HEX40-AY-YY-YY-AYY-1-Y

FILE:

hex40_ay_yy_yy_ayy_1_y.doc:

SCALE: SHEET:

NONE

3 OF 3

If this document is printed it becomes uncontrolled. Check for the latest revision

Share Link: