AK-270 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

AK-270

FM Radio Receiver Module D.I.Y. Kit (for Advanced Users)

Unspecified 

Refer to the guide below as a reference to inspect the quality of your soldered joints.

7) Once the HEX3653 chip is soldered on the PCB, place the resistors (R1, R2, R3 & R4), the

ceramic capacitors (C3, C4 & C5), the inductor (L1) and the diodes (D1 & D2) on the board

and solder them from the bottom side. You can solder these through-hole

components one by one or all at once.

8) Place the transistor (Q1) and the crystal (Y1) on the board and solder them from the

bottom side.

9) Insert the LED and the electrolytic (polarized) capacitors (C1 & C2) on the board and solder

them from the bottom side.

11

Share Link: