EMC1402-2-ACZL-TR(2007) Ver la hoja de datos (PDF) - SMSC -> Microchip
Número de pieza
componentes Descripción
Lista de partido
EMC1402-2-ACZL-TR Datasheet PDF : 37 Pages
| |||
1°C Temperature Sensor with Beta Compensation
Datasheet
Chapter 3 Electrical Specifications
3.1 Absolute Maximum Ratings
Table 3.1 Absolute Maximum Ratings
DESCRIPTION
Supply Voltage (VDD)
Voltage on SMDATA and SMCLK pins
Voltage on any other pin to Ground
Operating Temperature Range
Storage Temperature Range
Lead Temperature Range
Package Thermal Characteristics for MSOP-8
Thermal Resistance (θj-a)
ESD Rating, All pins HBM
RATING
-0.3 to 5.0
-0.3 to 5.5
-0.3 to VDD +0.3
-40 to +125
-55 to +150
Refer to JEDEC Spec. J-STD-
020
140.8
2000
UNIT
V
V
V
°C
°C
°C/W
V
Note:
Stresses at or above those listed could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those indicated
in the operation sections of this specification is not implied. When powering this device from
laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be
exceeded or device failure can result. Some power supplies exhibit voltage spikes on their
outputs when the AC power is switched on or off. In addition, voltage transients on the AC
power line may appear on the DC output. If this possibility exists, it is suggested that a clamp
circuit be used.
3.2 Electrical Specifications
Table 3.2 Electrical Specifications
VDD = 3.0V to 3.6V, TA = -40°C to 125°C, all typical values at TA = 27°C unless otherwise noted.
CHARACTERISTIC SYMBOL MIN TYP MAX UNITS
CONDITIONS
Supply Voltage
Supply Current
DC Power
VDD
3.0 3.3
3.6
V
IDD
150 220
uA
1 conversion / sec, dynamic
averaging disabled
750
uA
> 16 conversions / sec, dynamic
averaging enabled
Revision 1.16 (03-15-07)
10
DATASHEET
SMSC EMC1402
Share Link: 