HEF4060B Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Lista de partido

HEF4060B

14-stage ripple-carry binary counter/divider and oscillator

NXP Semiconductors. 

HEF4060B

14-stage ripple-carry binary counter/divider and oscillator

Rev. 7 — 16 November 2011

Product data sheet

1. General description

The HEF4060B is a 14-stage ripple-carry binary counter/divider and oscillator with three

oscillator terminals (RS, REXT and CEXT), ten buffered outputs (Q3 to Q9 and Q11 to

Q13) and an overriding asynchronous master reset input (MR).

The oscillator configuration allows design of either RC or crystal oscillator circuits. The

oscillator may be replaced by an external clock signal at input RS. The clock input’s

Schmitt-trigger action makes it highly tolerant to slower clock rise and fall times. The

counter advances on the negative-going transition of RS. A HIGH level on MR resets the

counter (Q3 to Q9 and Q11 to Q13 = LOW), independent of other input conditions.

It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS

(usually ground). Unused inputs must be connected to VDD, VSS, or another input.

2. Features and benefits

 Tolerant of slow clock rise and fall times

 Fully static operation

 5 V, 10 V, and 15 V parametric ratings

 Standardized symmetrical output characteristics

 Inputs and outputs are protected against electrostatic effects

 Specified from 40 C to +85 C

 Complies with JEDEC standard JESD 13-B

3. Ordering information

Table 1. Ordering information

All types operate from 40 C to +85 C.

Type number

Package

Name

Description

HEF4060BP

DIP16

plastic dual in-line package; 16 leads (300 mil)

HEF4060BT

SO16

plastic small outline package; 16 leads; body width 3.9 mm

Version

SOT38-4

SOT109-1

Share Link: