1461G2 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

1461G2

Powerpole® Connectors

Unspecified 

PP15/45 & POWERPOLE® PAK SPECIFICATIONS

ELECTRICAL

Current Rating Amperes ¹

UL 1977

CSA /

TUV

Singlepole Wire-to-Wire (10 AWG)

55

40

Singlepole Ground Wire-to-Wire or PCB (10 AWG) 45

35

3x3 Block Wire-to-Wire (10 AWG)

40

27

Singlepole 25A PCB-to-Wire (12 AWG)

25

-

2x3 Block 25A PCB-to-Wire (12 AWG)

25

22 *

Singlepole 45A PCB-to-Wire (10 AWG)

45

40 *

2x3 Block 45A PCB-to-Wire (10 AWG)

45

25 *

Voltage Rating AC/DC

UL 1977

600

Dielectric Withstanding Voltage

Volts AC

2,200

Avg. Mated Contact Resistance Milliohms ¹

15A Wire Contact with 5/8” of 16 AWG

0.875

30A Wire Contact with 5/8” of 12 AWG

0.600

45A Wire Contact with 5/8” of 10 AWG

0.525

45A PCB Contact to Contact

0.500

25A PCB Contact to Contact

0.600

UL Hot Plug Current Rating Amperes 5

250 Cycles at 72V DC

45A

250 Cycles at 120V DC

30A

UL Ground Short Time Current Test - 45A Premate Ground

750 Amps, 10 AWG Wire

4 Seconds

470 Amps, 12 AWG Wire

4 Seconds

MATERIAL

Housing

Plastic Resin

Contact Retention Spring

Housing Flammability Rating

UL94

Glow Wire

Contact

Base

Plating

Contact Termination Methods

Crimp ³

Hand Solder

Solder Dip

Wave Solder

Polycarbonate

Stainless Steel

V-0

825°C (GWFI) / 800°C (GWIT)

Copper Alloy

Tin or Silver

Wire Contacts

1331, 1332 & PCB Contacts

PCB Contacts

PCB Contacts

MECHANICAL

Wire Size Range

Max. Wire Insulation

Diameter

Operating Temperature ²

Powerpole® Housings &

Powerpole® Pak Shells

Mating Cycles No Load

by Plating

PCB-to-Wire

Wire-to-Wire

Avg. Mating / Unmating Force

Low Force Wire, High Force

PCB, & Ground

High Force Wire

Low Force PCB

Min. Contact / Spring

Retention Force

Powerpole® Pak Latch

Avg. Defeat Force

PCB Specifications

Mounting Style

PCB Thickness - in. (mm)

25A PCB Recommended

Traces

45A PCB Recommended

Traces

Mechanical Shock 4

MIL-STD-202

Vibration High Frequency 4

MIL-STD-202

AWG

20 to 10

in.

0.175

°F

-4° to 221°

Silver (Ag)

-

10,000

Lbf.

3

5

2

Lbf.

20

Lbf.

150

mm²

0.75 to 6.0

mm

4.450

°C

-20° to 105°

Tin (Sn)

1,500

1,500

N

13

22

9

N

90

N

667

Plated Through Hole

0.090 to 0.150 2.3 to 3.8

12 AWG Cross Section

10 AWG Cross Section

213

Condition A

204

Condition A

50g’s

10g’s

NOTE 1: See IEC 60664-1 for working voltage.

NOTE 2: Amp ratings are stated per position and based on all

positions being fully loaded.

* No TUV Recognition

1 - Based on: 105°C rated or better cable of the largest size,

Properly calibrated APP® recommended tooling, and a 25°C

ambient temperature. UL rating not to exceed the maximum

operating temperature. CSA rating below a 30°C temperature rise.

2 - Limited by the thermal properties of the connector plastic housing.

3 - Use APP® recommended tooling only. Alternate tools may

adversely affect the performance of our connectors along

with UL and CSA recognition.

4 - Tested with contact part number 261G2.

5 - Based on 2 housings blocked together.

All Data Subject To Change Without Notice

www.andersonpower.com

- 37 -

Share Link: