MGS301215-G Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Lista de partido
MGS301215-G Datasheet PDF : 12 Pages
| |||
MGS15
GENERAL SPECIFICATIONS
INPUT-OUTPUT
DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
ISOLATION INPUT-CASE
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
OUTPUT-CASE
DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
VIBRATION
10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
490.3m/s2 (50G), 11ms, once each along X, Y and Z axis
SAFETY AGENCY APPROVALS
UL60950-1, C-UL, EN60950-1
OTHERS
CASE SIZE/WEIGHT
COOLING METHOD
25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max
Convection/Forced air
*1 MGW15xx05/MGW15xx12/MGW15xx15 is available as single output, +10V/+24V/+30V
*2 Rated input 12V, 24V or 48V DC lo=100%
*3 Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope)
*4 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C.
*5 Rated input voltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C.
* Parallel operation with other model is not possible.
External view
Name Plate
¶Recommended Pad and Hole dia.
(TOP VIEW)
6-f1.5
Case
Bottom Cover
f 1 ±0.1
+Vout
+Vin
TRM
-Vin
RC
-Vout
20.32
[0.8]
25.4
[1.0]
¶ Unit : 0.1inch
¶ Dimension : mm
¶ Tolerance ±0.5 [±0.02]
¶ Dimensions in mm, [ ]=inches
¶ Pin terminal material : Copper
¶ Plating treatment of terminal : Lead free plating
¶ Case material : Brass
¶ Plating treatment of case : Nickel plating
¶ Bottom Cover : FR4 (t=0.6) [t=0.024]
¶ Please keep enough creepage distance with the
pattern on PCB and other components.
¶ Weight 20g max
MG-11
Share Link: 