XG2A-1001 Ver la hoja de datos (PDF) - OMRON Corporation

Número de pieza

componentes Descripción

Lista de partido

XG2A-1001

Flat Cable Connectors for PCBs

OMRON Corporation 

Flat Cable Connectors for PCBs

XG2

Ideal for high-density mounting.

IDC design allows for quick termination.

• Part of a total flat cable wiring solution, when used in

conjunction with XG4, XG5 and XG8 sockets and plugs.

• End terminates cable to a PCB or acts as a pass through

for connection to other cables or PCB’s.

• Uses a standard 2.54-mm grid terminal arrangement for

easier design of circuits.

• Terminal Arrangement: standard or reverse.

• Uses UL94V-0 approved insulation material.

• IDC Assembly Tools are available.

XG2 Connectors

■ Terminal Arrangement

The contact numbers are not marked on the Connector. If the cables are numbered from 1 starting from the edge, the relationship between the

wires and the terminals would be as shown below.

Standard Terminal

Arrangement

Reverse Terminal

Arrangement

Cable No.

Cable No.

Cable No.

Cable number arrangement (top view)

■ Ratings and Characteristics

Rated current

1A

Rated voltage

250 VAC

Contact resistance 15 mΩ max. (at 20 mV, 100 mA max.)

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength 500 VAC for 1 min. (leakage current: 1 mA

max.)

Operating

temperature

−55°C to 85°C (with no icing at low

temperature)

Cable No.

■ Materials and Finish

Base

Fiber-glass reinforced PBT resin

(UL94V-0)/black

Contacts Mating end Copper alloy/nickel base, tin plating

Terminals Copper alloy/nickel base, tin plating

Cover

Fiber-glass reinforced PBT resin

(UL94V-0)/black

■ Applicable Wires

1.27-mm pitch, AWG28, 7-strand flat cable.

• UL2651 (standard cable)

• UL20012 (folding cable)

• UL20028 (color-coded cable)

Flat Cable Connectors for PCBs XG2

61

Share Link: