AX88772F Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

AX88772F

USB to 10/100 Fast Ethernet/HomePNA Controller

Unspecified 

AX88772

USB to 10/100 Fast Ethernet/HomePNA Controller

4.1 Detailed Description

The following sections provide detailed description for some of the field in serial EEPROM memory map, for other fields

not covered here, please refer to AX88772 EEPROM user guide for more details.

4.1.1 Word Count for Preload (00h)

The number of words to be preloaded by the EEPROM loader = 15h.

4.1.2 Flag (01h)

Bit 15

Bit 7

TACE

Bit 14

Bit 6

RDCE

Bit 13 Bit 12

Reserved

Bit 5

Bit 4

SCPR

DCK

Bit 11

Bit 3

1

Bit 10

Bit 2

RWU

Bit 9

TDPE

Bit 1

Reserved

Bit 8

CEM

Bit 0

SP

SP: Self-Power (for USB GetStatus)

1: Self power.

0: Bus power.

RWU: Remote Wakeup support.

1: Indicate that this device supports Remote Wakeup.

0: Not support.

DCK: Disable Chirp K.

1: Disabled.

0: Enable.

SCPR: Software Control PHY Reset.

1: The PRL and PRTE bits of Software Reset Register control the PHYRST_N output level.

0: The USB reset on USB bus and PRTE bit of Software Reset Register control the PHYRST_N output level.

RDCE: RX Drop CRC Enable.

1: CRC byte is dropped on received MAC frame forwarding to host.

0: CRC byte is not dropped.

TACE: TX Append CRC Enable.

1: CRC byte is generated and appended by the ASIC for every transmitted MAC frame.

0: CRC byte is not appended.

CEM: Capture Effective Mode.

1: Capture effective mode enable.

0: Disabled.

TDPE: Test Debug Port Enable.

1: Enable test debug port for chip debug purpose.

0: Disable test debug port and the chip operate in normal function mode

Bit 1, 10~15: Reserved.

4.1.3 Node ID (04~06h)

The Node ID 0 to 5 bytes represent the MAC address of the device, for example, if MAC address = 01-23-45-67-89-ABh,

then Node ID 0 = 01, Node ID 1 = 23, Node ID 2 = 45, Node ID 3 = 67, Node ID 4 = 89, and Node ID 5 = AB.

14

ASIX ELECTRONICS CORPORATION

Share Link: