RTL8201BL
10. Revision History
Changes from Revision 1.0 to Revision 1.1 (Feb/02)
Section
Page
8.1.3. Power Dissipation
21
5.4 100Mbps Network Interface
6
7.10 Reset, and Transmit Bias(RTSET)
19
Schematic Layout
ACR; MII; SNI
Change
Text
Modify Remove 2.5V power consumption
Modify R5 is changed from 5.6K to 5.9K
Modify R5 is changed from 5.6K to 5.9K
Modify R5 is changed from 5.6K to 5.9K
Changes from Revision 1.1 to Revision 1.2 (Mar/29)
Section
Page
5.7 Reset and other pins
7
5.8 Power and Ground pins
7
6.6 Register 5 Auto-Negotiation Link
11
Partner Ability Register
7.11 3.3V power supply and voltage
19
conversion circuit
Schematic Layout
ACR; MII; SNI
Change
Text
Modify Add pin description for pin 32 and pin 8
Modify Remove pin description of pin 32 and pin 8
Modify Modify description of bit 5:<5> and bit 5:<7>
Modify
Modify
Add description: “Strongly emphasize here, could
not provide external 2.5V produced by any other
power device for PWFBOUT and PWFBIN.”
1. Modify net label:
Pin32: AVDD25 PWFBOUT
Pin8: DVDD25 PWFBIN
2. Add pull-high resistor for MDIO
3. Modify ResetB circuit to meet wake-on-lan
application
Realtek Semiconductor Corp.
Headquarters
1F, No. 2, Industry East Road IX, Science-based
Industrial Park, Hsinchu, 300, Taiwan, R.O.C.
Tel : 886-3-5780211 Fax : 886-3-5776047
WWW: www.realtek.com.tw
2002-03-29
29
Rev.1.2