datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

FM24CL16 Ver la hoja de datos (PDF) - Ramtron International Corporation

Número de pieza
componentes Descripción
Lista de partido
FM24CL16
RAMTRON
Ramtron International Corporation RAMTRON
FM24CL16 Datasheet PDF : 13 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
FM24CL16
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
VDD
Power Supply Voltage with respect to VSS
VIN
Voltage on any pin with respect to VSS
TSTG
TLEAD
VESD
Storage Temperature
Lead temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (JEDEC Std JESD22-A114-B)
- Machine Model (JEDEC Std JESD22-A115-A)
Package Moisture Sensitivity Level
Ratings
-1.0V to +5.0V
-1.0V to +5.0V
and VIN < VDD+1.0V
-40°C to + 125°C
300° C
4kV
300V
MSL-1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This
is a stress rating only, and the functional operation of the device at these or any other conditions above those
listed in the operational section of this specification is not implied. Exposure to absolute maximum ratings
conditions for extended periods may affect device reliability.
DC Operating Conditions (TA = -40° C to + 85° C, VDD =2.7V to 3.65V unless otherwise specified)
Symbol
Parameter
Min
Typ
Max Units
VDD
Main Power Supply
IDD
VDD Supply Current
@ SCL = 100 kHz
@ SCL = 400 kHz
@ SCL = 1 MHz
2.7
3.65
V
75
µA
200
µA
450
µA
ISB
Standby Current
ILI
Input Leakage Current
ILO
Output Leakage Current
VIH
Input High Voltage
VIL
Input Low Voltage
VOL
Output Low Voltage
@ IOL = 3.0 mA
RIN
WP Input Resistance (WP)
For VIN = VIL (max)
For VIN = VIH (min)
0.7 VDD
-0.3
50
1
1
µA
±1
µA
±1
µA
VDD + 0.5
V
0.3 VDD
V
0.4
V
K
M
VHYS
Input Hysteresis (Does not apply to WP)
0.05 VDD
V
Notes
1
2
3
3
5
4
Notes
1. SCL toggling between VDD-0.3V and VSS, other inputs VSS or VDD-0.3V.
2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued.
3. VIN or VOUT = VSS to VDD. Does not apply to pins with pull down resistors.
4. This parameter is characterized but not tested.
5. The input pull-down circuit is strong (50K) when the input voltage is below VIL and much weaker (1M)
when the input voltage is above VIH.
Rev 3.3
Nov. 2005
Page 8 of 13

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]