MAX2634AXT Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Lista de partido
MAX2634AXT Datasheet PDF : 8 Pages
| |||
315MHz/433MHz Low-Noise
Amplifier for Automotive RKE
ABSOLUTE MAXIMUM RATINGS
VCC Pin to GND .....................................................-0.3V to +6.0V
RFIN.................Pin Must Be AC-Coupled with DC-Blocking Cap
RFOUT, SHDN............................................-0.3V to (VCC + 0.3V)
RF Input Power .................................................................+5dBm
Continuous Power Dissipation (TA = +70°C)
6-Pin SC70 (derate 3.1mW/°C above +70°C) ..............245mW
Junction-to-Case Thermal Resistance (θJC)
(Note 1) ......................................................................115°C/W
Junction-to-Ambient Thermal Resistance (θJA)
(Note 1) ......................................................................326°C/W
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10s)....................................300°C
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a 4-layer
board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
CAUTION! ESD SENSITIVE DEVICE
DC ELECTRICAL CHARACTERISTICS
(VCC = +2.2V to +5.5V, TA = -40°C to +125°C, Typical values are at VCC = +3.0V, TA = +25°C, unless otherwise noted. RFIN and
RFOUT are AC-coupled and terminated to 50Ω. No RF input signals at RFIN and RFOUT.) (Note 2)
PARAMETER
CONDITIONS
Operating Supply Voltage
Operating Supply Current
SHDN = high, TA = +25°C
SHDN = high, TA = -40°C to +125°C
Shutdown Supply Current
VSHDN = 0, TA = +25°C
VSHDN = 0, TA = -40°C to +125°C
DIGITAL CONTROL INPUTS (SHDN)
Digital Input-Voltage High
Digital Input-Voltage Low
Digital Input-Current High
Digital Input-Current Low
VSHDN = VIH
VSHDN = VIL
SHUTDOWN MODE CONTROL
Enable Time
Disable Time
MIN TYP MAX UNITS
2.2
5.5
V
2.5
4
mA
6
mA
1
µA
10
µA
1.1
V
0.4
V
5
µA
1
µA
130
µs
20
µs
2 _______________________________________________________________________________________
Share Link: 