AIC1740 Ver la hoja de datos (PDF) - Analog Intergrations

Número de pieza

componentes Descripción

Lista de partido

AIC1740

Low Output Voltage, 500mA Low Dropout Linear Regulator

Analog Intergrations 

n BLOCK DIAGRAM

VIN

CURRENT

LIMITING

-

ERROR

AMP

THERMAL

+

SHUTDOWN

+ 1.235V

- Reference

n PIN DESCRIPTION

VOUT PIN - Output pin.

GND PIN - Power GND.

VIN PIN - Power Supply Input.

n APPLICATION INFORMATIONS

A 4.7µF (or greater) capacitor is required between

the AIC1740 output and ground for stability.

Without this capacitor the part will oscillate. Even

though most types of capacitor may work, the

equivalent series resistance (ESR) should be held

to 5Ω or less if Aluminum electrolytic type is used.

Many Aluminum electrolytics have electrolytes that

freeze at about -30°C, so solid tantalums are

AIC1740

VOUT

GND

recommended for operation below -25°C. The

value of this capacitor may be increased without

limit.

A 0.1µF capacitor (or greater) should be placed

from the AIC1740 input to ground if the lead

inductance between the input and power source

exceeds 500nH (approximately 10 inches of trace).

5

Share Link: