PI74ALVC16334
1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
16-Bit Universal Bus Driver
with 3-State Outputs
Product Features
PI74ALVC16334 is designed for low voltage operation,
VCC = 2.3V to 3.6V
Supports PC100 Registered DIMM
Typical VOLP (Output Ground Bounce)
< 0.8V at VCC = 3.3V, TA = 25°C
Typical VOHV (Output VOH Undershoot)
< 2.0V at VCC = 3.3V, TA = 25°C
Industrial operation at 40°C to +85°C
Packages available:
48-pin 240 mil wide plastic TSSOP (A)
48-pin 173 mil wide plastic TVSOP (K)
48-pin 300 mil wide plastic SSOP (V)
Product Description
Pericom Semiconductors PI74ALVC series of logic circuits
are produced in the Companys advanced 0.5 micron CMOS
technology, achieving industry leading speed.
The 16-bit PI74ALVC16334 universal bus driver is designed
for 2.3V to 3.6V Vcc operation.
Data flow from A to Y is controlled by Output Enable (OE).
The device operates in the transparent mode when LE is LOW.
When LE is HIGH, the A data is latched if CLK is held at a high or
low logic level. If LE is HIGH, the A-data is stored in the latch/flip-
flop on the low-to-high transition of CLK. When OE is HIGH, the
outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down,
OE should be tied to Vcc through a pullup resistor; the minimum
value of the resistor is determined by the current-sinking capability
of the driver.
Logic Block Diagram
1
PS8310 08/03/98