datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

LX1664 Ver la hoja de datos (PDF) - Microsemi Corporation

Número de pieza
componentes Descripción
Lista de partido
LX1664
Microsemi
Microsemi Corporation Microsemi
LX1664 Datasheet PDF : 17 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
PRODUCT DATABOOK 1996/1997
LX1664/1664A, LX1665/65A
DUAL OUTPUT PWM CONTROLLERS WITH 5-BIT DAC
PRODUCTION DATA SHEET
Pin
Name
SS
INV
VCC_CORE
VID0
VID1
VID2
VID3
VID4
LX1664
Pin #
1
2
3
4
5
6
7
8
LFB
PWRGD
LDRV
OV
CT
VCC
BDRV
9
N.C.
10
N.C.
11
12
13
GND
14
TDRV
15
VC1
16
LX1665
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
FUNCTIONAL PIN DESCRIPTION
Description
Soft-Start pin, internally connected to the non-inverting input of the error comparator.
Inverting input of the error comparator.
Output voltage. Connected to non-inverting input of the current-sense comparator.
Voltage Identification pin (LSB) input used to set output voltage.
Voltage Identification pin (2nd SB) input.
Voltage Identification pin (3rd SB) input.
Voltage Identification pin (4th SB) input.
Voltage Identification pin (MSB) input. This pin is also the range select pin — when low
(CLOSED), output voltage is set to between 1.30 and 2.05V in 0.05V increments. When high
(OPEN), output is adjusted from 2.0 to 3.5V in 0.1V increments.
Linear regulator feedback pin. 1.5V reference is connected to a resistor divider to set desired
output voltage.
Open collector output pulls low when the output voltage is out of limits.
Linear regulator drive pin. Connect to gate of MOSFET for linear regulator function.
SCR driver goes high when the processor's supply is over specified voltage limits.
The off-time is programmed by connecting a timing capacitor to this pin.
This is the (12V) supply to the IC, as well as gate drive to the bottom FET.
This is the gate drive to the bottom FET. Leave open in non-synchronous operation (when bottom
FET is replaced by a Schottky diode).
Both power and signal ground of the device.
Gate drive for top MOSFET.
This pin is a separate power supply input for the top drive. Can be connected to a charge pump
when only 12V is available.
Copyright © 1999
Rev. 1.2 11/99
7

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]