datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

ES7134S Ver la hoja de datos (PDF) - Unspecified

Número de pieza
componentes Descripción
Lista de partido
ES7134S Datasheet PDF : 8 Pages
1 2 3 4 5 6 7 8
Everest Semiconductor
ES7134S
3. APPLICATION DESCRIPTIONS
Sampling Rate and Input Clocks
According to the sampling rate, the device can work in two speed modes, single
speed and double speed. Table 1 lists the typical clock modes supported by the
device. The device supports USB clocks or non standard audio clocks like 25 MHz or
26 MHz.
Table 1 Speed Mode and CLKIN/LRCK Ratio
MODE
Sampling Rate
CLKIN/LRCK Ratio
Single Speed
8kHz – 50kHz
32, 64, 128, 192, 256, 384, 512, 768, 1024
Double Speed 84kHz – 100kHz
128, 192, 256, 384, 512, 768, 1024
Audio Data Input
The ES7134S can accept I²S serial audio input data from 16-bit to 24-bit. The device
can detect the data word length automatically. The relationship of SDATA, SCLK and
LRCK for the format is illustrated through Figures 2.
SDATA
SCLK
LRCK
1 SCLK
123
MSB
n-2 n-1 n
LSB
LEFT CHANNEL
1 SCLK
123
MSB
n-2 n-1 n
LSB
RIGHT CHANNEL
Figure 2 I²S serial audio data format up to 24-bit
Power Up and Power Down
Upon applying VDD, the device will reset itself and enter power down state. During
this state, the device clamps outputs to ground and power down the device operation
except for clock management unit. Once proper CLKIN and LRCK clocks are applied,
the device will leave power down state, and the device outputs ramp from ground to
common mode voltage softly. Then the device enters the normal operation.
Rev 2.0
3
May, 2017

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]