PDI1284P11 Ver la hoja de datos (PDF) - NXP Semiconductors.
Número de pieza
componentes Descripción
fabricante
PDI1284P11 Datasheet PDF : 16 Pages
| |||
Nexperia
PDI1284P11
3.3 V parallel interface transceiver/buffer
9. Static characteristics
Table 6. Static characteristics
Tamb = 0 °C to 70 °C; ground = 0 V; unless specified otherwise.
Symbol Parameter
Conditions
VIL
LOW-level input An, Bn, Cn and PLHI inputs; VCC = 3.0 V to 3.6 V
voltage
HLHI input; VCC = 3.0 V
VIH
HIGH-level input An, Bn, PLHI inputs; VCC = 3.0 V to 3.6 V
voltage
Cn inputs; VCC = 3.0 V to 3.6 V
HLHI input; VCC = 3.6 V
VH
hysteresis
voltage
An, Bn inputs; VCC = 3.3 V; VIL = 0.8 V; VIH = 2.0 V
Cn inputs; VCC = 3.3 V
VOL
LOW-level
pins An, HLHO; IOL = 50 µA; VCC = 3.0 V
output voltage pins An, HLHO; IOL = 4 mA; VCC = 3.0 V
pins Bn, Yn; IOL = 14 mA; VCC = 3.0 V
pin PLHO; IOL = 500 µA; VCC = 3.0 V
VOH
HIGH-level
pins An, HLHO; IOH = −500 µA; VCC = 3.0 V
output voltage pins An, HLHO; IOH = −4 mA; VCC = 3.0 V
pins Bn, Yn; IOH = −14 mA; VCC = 3.0 V
pin PLHO; IOH = 500 µA; VCC = 3.15 V
ICC
supply current VI = 0 V or VCC; IO = 0 A
pins VCC and VCC(B); VCC = 3.6 V; VCC(B) = 3.6 V to 5.5 V;
VI = 0 V or VCC; pins Bn = VCC(B); pins Cn = VCC(B) or
floating
pins VCC(B); VCC = 3.6 V; VI = 0 V or VCC; pins Cn = 0 V
pin DIR = 3.6 V; VCC(B) = 3.6 V
pin DIR = 3.6 V; VCC(B) = 5.5 V
pin DIR = 0 V; VCC(B) = 3.6 V; pins Bn = 0 V
pin DIR = 0 V; VCC(B) = 5.5 V; pins Bn = 0 V
IOFF
power-off
pins Bn, Cn, Yn; VO = 5.5 V; VCC = 0 V
leakage current
VCC(B) = 0 V
VCC(B) = 4.5 V
II
input leakage VI = 0 V to VCC
current
IOZ
OFF-state
3-state; VO = VCC or 0 V
output current
Ro
output
resistance
RPU
pull-up
resistance
VCC = 3.3 V; see Figure 9
VO = 1.65 V ± 0.1 V; B/Y side
B/Y side; VCC = 3.3 V; output in high-Z with resistive pull-up
Min
-
-
2.0
2.3
2.6
[1] 0.4
[1] 0.8
-
-
-
-
2.8
2.4
2.23
3.1
[1] -
-
[2]
-
-
-
-
-
-
[3] -
[3] -
[1] 35
[1] 1.15
Typ Max
- 0.8
- 1.55
--
--
--
0.47 -
0.47 -
- 0.2
- 0.4
- 0.77
- 0.8
--
--
--
--
5-
0.1 100
10 15
16 20
30 40
47 60
- ±100
- ±100
- ±1
- ±20
45 55
1.4 1.65
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
µA
µA
mA
mA
mA
mA
µA
µA
µA
µA
Ω
kΩ
[1] Typical values at Tamb = 25 °C.
[2] Includes extra ICC(B) current from pull-up resistors, i.e. ICC(B) = (total number of LOW inputs on B and C sides) × (VCC(B) / RPU).
[3] The pull-up resistor on the B side outputs makes it impossible to test IOZ on the B side. This applies to the input current on the C side
inputs as well.
PDI1284P11_3
Product data sheet
Rev. 03 — 25 August 2008
© Nexperia B.V. 2017. All rights reserved
7 of 16
Share Link: 