SI3010-F-FS Ver la hoja de datos (PDF) - Silicon Laboratories
Número de pieza
componentes Descripción
Lista de partido
SI3010-F-FS Datasheet PDF : 76 Pages
| |||
Si2401
3. Bill of Materials: Si2401/10 Chipset
Component
Value
Supplier(s)
C1, C2
33 pF, Y2, X7R, ±20%
Panasonic, Murata, Vishay
C3
10 nF, 250 V, X7R, ±20%
Venkel, SMEC
C4
1.0 µF, 50 V, Tant/Elect, ±20%
Venkel, SMEC
C5, C6, C50
0.1 µF, 16 V, X7R, ±20%
Venkel, SMEC
C7
2.7 nF, 50 V, X7R, ±20%
Venkel, SMEC
C8, C9
680 pF, Y2, X7R, ±10%
Panasonic, Murata, Vishay
C10
C40, C411
0.01 µF, 16 V, X7R, ±20%
33 pF, 16 V, NP0, ±5%
Venkel, SMEC
Venkel, SMEC
C51
D1, D22
0.22 µF, 16 V, X7R, ±20%
Dual Diode, 225 mA, 300 V, CMPD2004S
Venkel, SMEC
Central Semiconductor
FB1, FB2
Ferrite Bead, BLM21AG601SN1
Murata
Q1, Q3
NPN, 300 V, MMBTA42
OnSemi, Fairchild
Q2
PNP, 300 V, MMBTA92
OnSemi, Fairchild
Q4, Q5
NPN, 80 V, 330 mW, MMBTA06
OnSemi, Fairchild
RV1
Sidactor, 275 V, 100 A
Teccor, Protek, ST Micro
R1
1.07 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R2
150 Ω, 1/16 W, 5%
Venkel, SMEC, Panasonic
R3
3.65 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R4
2.49 kΩ, 1/2 W, 1%
Venkel, SMEC, Panasonic
R5, R6
100 kΩ, 1/16 W, 5%
Venkel, SMEC, Panasonic
R7, R8
20 MΩ, 1/16 W, 5%
Venkel, SMEC, Panasonic
R9
1 MΩ, 1/16 W, 1%
Venkel, SMEC, Panasonic
R10
536 Ω, 1/4 W, 1%
Venkel, SMEC, Panasonic
R11
73.2 Ω, 1/2 W, 1%
Venkel, SMEC, Panasonic
R12, R13
R15, R163
56 Ω, 1/16 W, 1%
0 Ω, 1/16 W
Venkel, SMEC, Panasonic
Venkel, SMEC, Panasonic
U1
Si2401
Silicon Labs
U2
Y11,4
Si3010
4.9152 MHz, 20 pF, 100 ppm, 150 Ω ESR
Silicon Labs
ECS Inc., Siward
Z1
Zener Diode, 43 V, 1/2 W, BZT52C43
On Semi
Notes:
1. In STB applications, C40, C41, and Y1 can be removed when using the 27 MHz clock input feature. See
"4.10. Clock Generation Subsystem" on page 23.
2. Several diode bridge configurations are acceptable. For example, a single DF04S or four 1N4004 diodes may be
used.
3. Murata BLM21AG601SN1 may be substituted for R15–R16 (0 Ω) to decrease emissions.
4. To ensure compliance with ITU specifications, frequency tolerance must be less than 100 ppm including initial
accuracy, 5-year aging, 0 to 70 °C, and capacitive loading. 50 ppm initial accuracy crystals typically satisfy this
requirement.
Rev. 1.0
11
Share Link: 