MC3410 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Lista de partido

MC3410

No description available.

Unspecified 

MC3410 3-Axis Accelerometer

3.2 PIN DESCRIPTION

Pin

1

2

3

4

5

6

7

8

9

10

11

12

Table 2. Pin Description

Name

NC

SDA 1

DVDD

NC

INTN 2

VPP

AVDD

NC

GND

TEST

NC

SCL 1

Function

No connect

I2C serial data input/output

I/O power supply

No connect

Interrupt active LOW 3

Connect to GND

Analog power supply

No Connect

Ground

Optional probe pin

No connect

I2C serial clock input

Datasheet

Notes:

1) This pin requires a pull-up resistor, typically 4.7kΩ to DVDD. Refer to I2C Specification

for Fast-Mode devices. Higher resistance values can be used (typically done to reduce

current leakage) but such applications are outside the scope of this datasheet.

2) This pin can be configured by software to operate either as an open-drain output or

push-pull output (MODE: Register). If set to open-drain, then it requires a pull-up

resistor, typically 4.7kΩ to DVDD.

3) INTN pin polarity is programmable in the MODE: Register.

mCube Proprietary.

APS-048-0010v2.2

© 2014 mCube Inc. All rights reserved.

8 / 75

Share Link: