XE24S100 Ver la hoja de datos (PDF) - Xecom
Número de pieza
componentes Descripción
fabricante
XE24S100 Datasheet PDF : 16 Pages
| |||
AT COMMANDS
#IxxxAn? Read Analog Input “n” at Node
Address xxx - allows analog input values at
any node to be read remotely.
n=0 Read input ADC0
n=1 Read input ADC1
#IxxxDn? Read Digital Input “n” at Node
Address xxx - This command allows
digital input status to be read remotely.
n=0 Read input DIO0
n=1 Read input DIO1
n=2 Read input DIO2
n=3 Read input DIO3
n=4 Read DIO4 (ADC0 set as digital I/O)
n=5 Read DIO5 (ADC1 set as digital I/O)
#IxxxDn=z Set Digital Output “n” at Node
Address xxx - remotely modify digital
output n. A 0 sets the output to a logic low; a
1 sets it to a logic high.
n=0 Set output DIO0
n=1 Set output DIO1
n=2 Set output DIO2
n=3 Set output DIO3
#Pn Low Power Operation - Sets the XE24S100
reduced power modes.
0 Idle mode.
1 Sleep Mode.
2 Power-Down Mode.
3 RF Monitor Mode
#R Receive Broadcast - Allows XE24S100 to
receive a broadcasted message and present
it on the serial interface.
XE24S100 Responses
Numeric
0
1
2
3
4
6
7
8
9
Full Word
OK
CONNECT RF
RING
DISCONNECT
ERROR
NO CONNECTION
BUSY
SORRY
WAIT
FILE
Description
Successfully executed command line
Wireless Connection Established
Wireless Link Request Detected
Lost Wireless Link
Error in command line, or file transfer
Failed to Establish Wireless Link
Link Request Time Out has occurred
No Response to Count-Off Request
Wireless Link is not available
File Transfer Mode
XECOM
(12)
XE24S100
Share Link: 