XE24S100 Ver la hoja de datos (PDF) - Xecom
Número de pieza
componentes Descripción
Lista de partido
XE24S100 Datasheet PDF : 16 Pages
| |||
XE24S100 PIN CONFIGURATION
XE24S100
DIO2 1
DIO3 2
VCC 3
/RTS 4
/CTS 5
RXD 6
TXD 7
N/C 8
N/C 9
18 DIO0
17 DIO1
16 GND
15 ADC1
14 ADC0
13 Reserved
12 N/C
11 N/C
10 N/C
top view
SIGNAL PINS
DESCRIPTION
DIO2
1 DIO2 may be programmed as either a digital input or digital output. It connects directly to
the communications controller in the XE24S100.
DIO3
VCC
/RTS
2 DIO3 may be programmed as either a digital input or digital output. It connects directly to
the communications controller in the XE24S100.
3
3.3 Volt power for the XE24S100.
4 Request to Send provides hardware flow control from the host system. The host system
drives /RTS high to signal the XE24S100 to temporarily stop the flow of data on RXD.
/CTS
5 Clear to Send provides hardware flow control from the XE24S100. The XE24S100 drives
/CTS high to signal the host to temporarily stop the flow of data on the TXD.
RXD
6 Received Data is the data output from the XE24S.
TXD
7 Transmit Data is the data input to the XE24S
N/C
8-12 No Connection
Reserved 13 This Pin is reserved for future use
ADC0
14 Analog Input 0 to the XE24S100 communications controller. ADC0 connects to an
internal 12-bit Analog to Digital Convertor. ADC0 may also be configured as a digital
input if no analog inputs are required.
ADC1
15 Analog Input 1 to the XE24S100 communications controller. ADC1 connects to an
internal 12-bit Analog to Digital Convertor. ADC1 may also be configured as a digital
input if no analog inputs are required.
Ground
16 Common voltage reference for the XE24S100.
DIO1
DIO0
17 DIO1 may be programmed as either a digital input or digital output. It connects directly to
the communications controller in the XE24S100.
18 DIO0 may be programmed as either a digital input or digital output. It connects directly to
the communications controller in the XE24S100.
XECOM
(4)
XE24S100
Share Link: 