ISL8200AMM Ver la hoja de datos (PDF) - Renesas Electronics
Número de pieza
componentes Descripción
Lista de partido
ISL8200AMM Datasheet PDF : 24 Pages
| |||
DATASHEET
ISL8200AMM
Complete Current Share 10A DC/DC Power Module
The ISL8200AMMREP is a simple and easy to use high
power, current-sharing DC/DC power module for
Datacom/Telecom/FPGA power hungry applications. All that
is needed is the ISL8200AMMREP, a few passive
components and one VOUT setting resistor to have a
complete 10A design ready for market.
The ease of use virtually eliminates the design and
manufacturing risks while dramatically improving time to
market.
Need more output current? Parallel up to six ISL8200AMMREP
modules to scale up to a 60A solution.
The simplicity of the ISL8200AMMREP is in its "Off The Shelf",
unassisted implementation versus a discrete implementation.
Patented current sharing in multi-phase operation greatly
reduces ripple currents, BOM cost and complexity. For
example, parallel 2 for 20A and up to 6 for 60A. The output
voltage can be precisely regulated to as low as 0.6V with ±1%
output voltage regulation over line, load, and temperature
variations.
The ISL8200AMMREP’s thermally enhanced, compact QFN
package, operates at full load and over-temperature, without
requiring forced air cooling. It's so thin it can even fit on the
back side of the PCB. Easy access to all pins with few external
components, reduces the PCB design to a component layer
and a simple ground layer.
FN8287
Rev 2.00
June 3, 2015
Features
• Specifications per DLA VID V62/10608
• Complete Switch Mode Power Supply in One Package
• Patented Current Share Architecture Reduces Layout
Sensitivity when Modules are Paralleled
• Programmable Phase Shift (1 to 6 Phase)
• Extremely Low Profile (2.2mm Height)
• Input Voltage Range +3.0V to +20V at 10A, Current Share
up to 60A
• A Single Resistor Sets VOUT from +0.6V to +6V
• Output Overvoltage, Overcurrent and Over-Temperature
Protection and Undervoltage Indication
• Full Mil-Temp Electrical Performance from -55°C to +125°C
• Full Traceability Through Assembly and Test by Date/Trace
Code Assignment
• Enhanced Process Change Notification
• Enhanced Obsolescence Management
Applications
• Servers, Telecom and Datacom Applications
• Industrial and Medical Equipment
• Point of Load Regulation
Related Literature
• AN1738 “ISL8200AMEV1PHZ Evaluation Board User’s
Guide”
• ISL8200AMMREP iSim Model - (Product Information Page)
Complete Functional Schematic
VIN = 4.5V TO 20V
PVIN = 3V TO 20V
PVIN
VIN
VOUT
ISL8200AMMREP
POWER MODULE
EN
VOUT_SET
FF
VSEN_REM-
V0UT =
0.6V TO 6.0V
RSET
ISHARE
PGND1
10µF
5k
NOTE: For input voltage higher than 4.5V, VIN can be tied to PVIN directly
(see Figure 22 for details).
FIGURE 1. COMPLETE 10A DESIGN, JUST SELECT RSET FOR
THE DESIRED VOUT
ISL8200AMMREP Package
2.2mm
15mm
15mm
FIGURE 2. THE 2.2mm HEIGHT IS IDEAL FOR THE BACKSIDE
OF PCBS WHEN SPACE AND HEIGHT ARE PREMIUM
FN8287 Rev 2.00
June 3, 2015
Page 1 of 24
Share Link: 