CY8CMBR2110-24LQXI Ver la hoja de datos (PDF) - Cypress Semiconductor
Número de pieza
componentes Descripción
fabricante
CY8CMBR2110-24LQXI Datasheet PDF : 71 Pages
| |||
CY8CMBR2110
Configuring the CY8CMBR2110
EZ-Click Customizer Tool
The EZ-Click Customizer tool is a simple and intuitive graphical
user interface for efficiently configuring the device. It takes all the
required parameters and configures the device accordingly,
using I2C communication. The configuration can be saved locally
on the computer and later re-used by the tool for another design.
The tool can also be used to generate a configuration file, which
can be used through Bridge Control Panel (refer to
AN2397 - CapSense Data Viewing Tools) or by the host (in the
host firmware) to configure the device. For more details, refer to
the EZ-Click Customizer Tool User Guide.
Configuring the Device using a Host Processor
CY8CMBR2110 can be configured by a Host processor. The
advantages of using a host processor to configure are listed
below.
■ In-system configuration - no need to take the device (chip) out
of the board.
■ Run time configuration - modifying the features dynamically by
a host processor.
To configure the device using a Host processor, there is a
comprehensive list of APIs and these APIs are to be called from
the Host processor in a specific order. These APIs use I2C
communication to configure the device features. You can
download
the
source
code
from
http://www.cypress.com/?rID=74590.
For more details refer to CY8CMBR2110 CapSense® Design
Guide.
Third-party Programmer
To configure large number of devices, Cypress recommends a
third-party vendor to perform automated programming on the
devices. For this, you must give the hex file of your configuration,
generated by EZ-Click Customizer Tool to Hilo systems (a
third-party programmer).
Contact http://www.hilosystems.com.tw/en/index.aspx for
further information.
Document Number: 001-74494 Rev. *B
Page 6 of 71
Share Link: 