PE423641 Ver la hoja de datos (PDF) - Peregrine Semiconductor
Número de pieza
componentes Descripción
Lista de partido
PE423641 Datasheet PDF : 11 Pages
| |||
Evaluation Kit
The SP4T switch evaluation board was designed
to ease customer evaluation of Peregrine’s
PE423641. The RF common port is connected
through a 50Ω transmission line via the top SMA
connector, J1. RF1, RF2, RF3 and RF4 are
connected through 50Ω transmission lines via
SMA connectors J3, J5, J2 and J4, respectively.
A through 50Ω transmission is available via SMA
connectors J6 and J7. This transmission line can
be used to estimate the loss of the PCB over the
environmental conditions being evaluated.
The board is constructed of a four metal layer
FR4 material with a total thickness of 62 mils.
The middle layers provide ground for the
transmission lines. The transmission lines were
designed using a coplanar waveguide with
ground plane model using a trace width of
32 mils, trace gaps of 25 mils, and metal
thickness of 2.1 mils.
PE423641
Product Specification
Figure 12. Evaluation Board Layouts
PRT-50900
©2013-2014 Peregrine Semiconductor Corp. All rights reserved.
Page 8 of 11
Document No. DOC-12414-2 │ UltraCMOS® RFIC Solutions
Share Link: 