ESMM161VSN821MQ30S Ver la hoja de datos (PDF) - Nippon Chemi-Con
Número de pieza
componentes Descripción
Lista de partido
ESMM161VSN821MQ30S Datasheet PDF : 5 Pages
| |||
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Downsized snap-ins, 85C
@Downsized and longer life from SMQ series
@Endurance with ripple current : 3,000 hours at 85C
@Non solvent resistant type
@RoHS Compliant
SMM
Downsized
Longer life
SMQ
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range -25 to +85C
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
160 to 450Vdc
P20% (M)
(at 20C, 120Hz)
I[3 CV
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 5 minutes)
Rated voltage (Vdc)
160 to 400V 420 & 450V
tanE (Max.)
0.15
0.20
(at 20C, 120Hz)
Rated voltage (Vdc)
160 to 400V 420 & 450V
Z(-25C)/Z(+20C)
4
8
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 3,000 hours at 85C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P15% of the initial value
D.F. (tanE)
[150% of the initial specified value
Leakage current
[The initial specified value
?DIMENSIONS [mm]
@Terminal Code : VS (F20 to F35) : Standard
Sleeve (PET : Black)
Negative mark
PC board pin-out
10
@Terminal Code : LI (F35)
Sleeve (PET : Black)
Negative mark
PC board pin-out
2-1.2B6
Vent
LP2
*4.0P0.5
2-F2
*FD=35mm : 3.5P0.5mm
The standard design has no plastic disc.
Vent
LP2
4.5P1
5P0.5
14.2P1
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E SMM A A A V S N A A A M A A A S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 330MF:331, 3,300MF:332)
Dummy terminal code
Terminal code (VS, LI)
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
Please refer to "Product code guide (snap-in type)"
?RATED RIPPLE CURRENT MULTIPLIERS
@Frequency Multipliers
Frequency(Hz) 50 120 300 1k 10k 50k
160 to 250Vdc 0.81 1.00 1.17 1.32 1.45 1.50
315 to 450Vdc 0.77 1.00 1.16 1.30 1.41 1.43
The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5C rise.
When long life performance is required in actual use, the rms ripple current has to be reduced.
(1/4)
CAT. No. E1001K
Share Link: 