AP1694AEV11 Ver la hoja de datos (PDF) - Diodes Incorporated.
Número de pieza
componentes Descripción
Lista de partido
AP1694AEV11 Datasheet PDF : 10 Pages
| |||
AP1694AEV11 User Guide
230VAC Triac Dimmable GU10 LED Driver
Evaluation Board Schematic
Figure 3: Evaluation Board Schematic
Evaluation Board Layout
Figure 4: PCB Board Layout Top View
Figure 5: PCB Board Layout Bottom View
Quick Start Guide
1. By default, the evaluation board is preset at 400mA LED Current adjustment by R10//R11.
2. Ensure that the AC source is switched OFF or disconnected.
3. Connect the AC line wires of power supply to “AC+ and AC‐” on the left side of the board.
4. Connect the anode wire of external LED string to LED+ output test point.
5. Connect the cathode wire of external LED string to LED‐ output test point.
6. Turn on the main switch. LED string should light up.
AP1694AEV11 Rev2
July 2015
www.diodes.com
Page 4 of 10
Share Link: 