datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga

JFW Ver la hoja de datos (PDF) - Wall Industries,Inc.

Número de pieza
componentes Descripción
Lista de partido
JFW Datasheet PDF : 5 Pages
1 2 3 4 5
Rev F
JFW SERIES
Up to 15 Watts
Open Frame DC/DC Power Converters
Single Outputs
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
SAFETY & EMC CHARACTERISTICS
UL60950-1
Safety Approvals
EN60950-1
IEC60950-1
EMI(7)
EN55022
Class A
Class B
Radiated Immunity
EN61000-4-3
10 V/m
Perf. Criteria A
Fast Transient(8)
EN61000-4-4
±2kV
Perf. Criteria A
Surge(8)
EN61000-4-5
±1kV
Perf. Criteria A
Conducted Immunity
EN61000-4-6
3 Vr.m.s
Perf. Criteria A
NOTES
(1) Typical Value at Nominal Input Voltage and Full Load
(2) Typical Value at Nominal Input Voltage and No Load
(3) Maximum Value at Nominal Input Voltage and Full Load
(4) Test by Minimum Input and Constant Resistive Load
(5) Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external
resistor between the TRIM pin and either the +OUTPUT pin or the –OUTPUT pin.
(6) The CTRL pin voltage is referenced to –INPUT. (See “Product Options” table for suffix options)
(7) The JFW Series meets EN55022 Class A and Class B only with external components connected to the input pins of the converter.
(8) An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5.
The filter capacitor suggested is Nippon chemi-con KY series, 220µF/100V, ESR 48mΩ.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
*Due to advances in technology, specifications subject to change without notice.
CHARACTERISTIC CURVES
JFW48S5-3000 Derating Curve
JFW48S5-3000 Efficiency vs Input Voltage
JFW48S5-3000 Efficiency vs Output Current
1/9/2018
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 3 of 5

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]