XE3301F Ver la hoja de datos (PDF) - Xecom

Número de pieza

componentes Descripción

Lista de partido

XE3301F

Multi-National 33,600 BPS Modem Module

Xecom 

Using the XE3301 in the US

All equipment connected to the public telephone network

in the United States must have FCC Part 68

Registration. Part 68 registration certifies that the device

will not cause harm to the telephone network. The

XE3301 provides a user transferable FCC Registration.

This permits XE3301 customers to use our FCC

registration number without submitting their systems for

additional testing. Call Xecom technical support at 408-

945-6640 with any questions on whether your system

qualifies to use Xecom's FCC Registration Number.

In your operating instructions you must provide certain

information to the end user of the modem. The

instructions should include most of the instructions

shown below. Only the information regarding the

mounting of the device in the final assembly should be

omitted.

FCC Instructions:

This product complies with Part 68 of the FCC Rules and

Regulations. On each device shipped, there is a label

which contains, among other information, the FCC

Registration Number and Ringer Equivalence Number

(REN) for this product. You must, upon request, provide

this information to your telephone company.

The mounting of this device in the final assembly must

be made in such a manner as to preserve the high

voltage protection between the TIP/RING Connection

and the rest of the system. Typically, this may be

accomplished by maintaining a minimum spacing .100

mils between the TIP/RING Traces to the RJ-11C Jack

and low voltage portion of the system. No additional

circuitry may be attached between TIP/RING and the

telephone line connection, unless specifically allowed in

the rules.

If your system causes harm to the telephone network,

the telephone company may discontinue service

temporarily. If possible, they will notify you in advance. If

advance notification is not practical, you will be notified

as soon as possible.

Your telephone company may make changes in its

facilities, equipment, operations or procedures that could

affect proper functioning of your equipment. If they do,

you will be notified in advance to give you an opportunity

to maintain uninterrupted telephone service.

If you experience trouble with this device, please contact

XECOM at (408) 945-6640 for assistance. The

telephone company may ask you to disconnect this

device from the network until the problem has been

corrected or until you are sure that the device is not

malfunctioning.

The device may not be used on coin service lines

provided by the telephone company (this does not apply

to private coin telephone applications which use

standard telephone lines). Connection to party lines is

subject to state tariffs.

FCC Labels:

FCC rules also require a label which is visible from the

outside of the equipment. The label should display

Xecom's name as holder of the FCC Registration, the

FCC Registration Number and Ringer Equivalence of the

modem. This is the same information which appears on

the top of each XE3301 module.

The REN is useful to determine the quantity of devices

you may connect to a telephone line and still have all of

these devices ring when the number is called. In most,

but not all areas, the sum of the RENs of all devices

connected to one line should not exceed five (5.0). To be

certain of the number of devices you may connect to the

line, as determined by the REN, you should contact the

local telephone company to determine the maximum

REN for your calling area.

XECOM

(18)

XE3301

Share Link: