TDA3604Q/N1 Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza

componentes Descripción

Lista de partido

TDA3604Q/N1

Multiple voltage regulators with external reset delay and switch

Philips Electronics 

Philips Semiconductors

Multiple voltage regulators with external

reset delay and switch

Product specification

TDA3604Q;

TDA3604TH

FEATURES

General

• One VP-state controlled regulator (regulator 2)

• Regulator 2, reset and ignition buffer operate during

load dump and thermal shutdown

• Separate control pins for switching regulator 1 and the

power switch

• Supply voltage range of −18 to +50 V

(operating from 9.75 V)

• Low reverse current of regulator 2

• Low quiescent current (when regulator 1, power switch

and ignition buffer are switched off)

• Ignition input/output

• Reset output

• Adjustable reset delay time

• High ripple rejection

• Power switch

• Separate supply for the power switch.

GENERAL DESCRIPTION

The TDA3604Q and TDA3604TH are multiple output

voltage regulators with a power switch, intended for use in

car radios with or without a microcontroller.

It contains one fixed voltage regulator with a foldback

current protection (regulator 1) and one fixed voltage

regulator (regulator 2), intended to supply a

microcontroller, that also operates during load dump and

thermal shutdown.

There is a power switch with protections, operated by an

enable input.

The reset and ignition outputs can be used to interface by

the microcontroller. The reset signal can be used to call up

the microcontroller and the ignition output indicates

ignition voltage available.

Both supply pins can withstand load dump pulses and

negative supply voltages.

Regulator 2 will be switched on at a supply voltage >6.5 V

and off at a voltage of regulator 2 <1.9 V.

Protections

• Reverse polarity safe (down to −18 V without high

reverse current)

• Able to withstand voltages up to 18 V at the outputs

(supply line may be short-circuited)

• ESD protected on all pins

• Thermal protection

• Load dump protection

• Foldback current limit protection for regulators 1 and 2

• Delayed second current limit protection for the power

switch

• The regulator outputs and the power switch are

DC short-circuited safe to ground and VP.

ORDERING INFORMATION

TYPE

NUMBER

TDA3604Q

TDA3604TH

PACKAGE

NAME

DESCRIPTION

DBS13P plastic DIL-bent-SIL power package; 13 leads (lead length 12 mm)

HSOP20 plastic heat-dissipating small outline package; 20 leads; low stand-off

VERSION

SOT141-6

SOT418-2

1997 Aug 21

2

Share Link: