RMWB12001 Ver la hoja de datos (PDF) - Raytheon Company
Número de pieza
componentes Descripción
Lista de partido
RMWB12001 Datasheet PDF : 6 Pages
| |||
RMWB12001
12 GHZ Buffer Amplifier MMIC
PRODUCT INFORMATION
Application
Information
CAUTION: THIS IS AN ESD SENSITIVE DEVICE.
Chip carrier material should be selected to have GaAs compatible thermal coefficient of expansion and high thermal
conductivity such as copper molybdenum or copper tungsten. The chip carrier should be machined, finished flat,
plated with gold over nickel and should be capable of withstanding 325°C for 15 minutes.
Die attachment should utilize Gold/Tin (80/20) eutectic alloy solder and should avoid hydrogen environment for
PHEMT devices. Note that the backside of the chip is gold plated and is used as RF and DC ground.
These GaAs devices should be handled with care and stored in dry nitrogen environment to prevent contamination
of bonding surfaces. These are ESD sensitive devices and should be handled with appropriate precaution including
the use of wrist grounding straps. All die attach and wire/ribbon bond equipment must be well grounded to prevent
static discharges through the device.
Recommended wire bonding uses 3 mils wide and 0.5 mil thick gold ribbon with lengths as short as practical
allowing for appropriate stress relief. The RF input and output bonds should be typically 0.012” long corresponding
to a typically 2 mil between the chip and the substrate material.
Figure 1
Functional
Block Diagram
Drain Supply
Vd1
Drain Supply
Vd2 and Vd3
Output Power
Detector Voltage Vdet
RF IN
MMIC Chip
RF OUT
Figure 2
Chip Layout and
Bond Pad locations.
Chip size is 2.24
mm x 1.70 mm x
100 µm. Back of
chip is RF and DC
ground.
Ground (Back of Chip) Gate Supply Vg
Note:
Detector delivers > 0.1V DC into 3 kΩ load resistor for > +20 dBm output power. If output power level detection is not desired, do not connect to
detector bond pad.
Dimensions in mm
0.11
1.70
1.60
1.42
0.48 0.73
2.03 2.24
1.70
1.60
0.69
www.raytheon.com/micro
0.10
0.00
0.00
1.11
Characteristic performance data and specifications are subject to change without notice.
Revised March 14, 2001
Page 2
0.10
0.00
2.12 2.24
Raytheon RF Components
362 Lowell Street
Andover, MA 01810
Share Link: 