M30220 Ver la hoja de datos (PDF) - MITSUBISHI ELECTRIC

Número de pieza

componentes Descripción

Lista de partido

M30220

SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

MITSUBISHI ELECTRIC  

Tentative Specifications REV.E

Mitsubishi microcomputers

Specifications in this manual are tentative and subject to change.

M30220 Group

Memory

SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Operation of Functional Blocks

The M30220 group accommodates certain units in a single chip. These units include ROM and RAM to

store instructions and data and the central processing unit (CPU) to execute arithmetic/logic operations.

Also included are peripheral units such as timers, real time port, serial I/O, LCD drive control circuit, D-A

converter, A-D converter, DMAC and I/O ports.

The following explains each unit.

Memory

Figure 1.4.1 is a memory map of the M30220 group. The address space extends the 1M bytes from ad-

dress 0000016 to FFFFF16. From FFFFF16 down is ROM. For example, in the M30220MA-XXXGP, there

is 96K bytes of internal ROM from E800016 to FFFFF16. The vector table for fixed interrupts such as the

_______

reset and NMI are mapped to FFFDC16 to FFFFF16. The starting address of the interrupt routine is stored

here. The address of the vector table for timer interrupts, etc., can be set as desired using the internal

register (INTB). See the section on interrupts for details.

From 0040016 up is RAM. For example, in the M30220MA-XXXGP, 6K bytes of internal RAM is mapped to

the space from 0040016 to 01BFF16. In addition to storing data, the RAM also stores the stack used when

calling subroutines and when interrupts are generated.

The SFR area is mapped to 0000016 to 003FF16. This area accommodates the control registers for periph-

eral devices such as I/O ports, A-D converter, serial I/O, timers, and LCD, etc. Figures 1.7.1 to 1.7.3 are

location of peripheral unit control registers. Any part of the SFR area that is not occupied is reserved and

cannot be used for other purposes.

The special page vector table is mapped to FFE0016 to FFFDB16. If the starting addresses of subroutines

or the destination addresses of jumps are stored here, subroutine call instructions and jump instructions

can be used as 2-byte instructions, reducing the number of program steps.

0000016

SFR area

For details, see

Figures 1.7.1 to 1.7.3

0040016

Internal RAM area

XXXXX16

Internal RAM area

Type No.

Address XXXXX16 Address YYYYY16

M30220MA

01BFF16

E800016

YYYYY16

Internal ROM area

FFFFF16

Figure 1.4.1. Memory map

8

FFE0016

Special page

vector table

FFFDC16

Undefined instruction

Overflow

BRK instruction

Address match

Single step

Watchdog timer

DBC

NMI

FFFFF16

Reset

Share Link: